Warning: Last items in stock!
Before buy make sure there is no blockage in the iron.
Steam Generator Iron Feed Water Pump Replacement.
This feed pump is suitable to Morphy Richards, Steamworks, AVR and Kenwood steam generator irons.
It is simple job to replace the feed pump.
When push the trigger and no steam 100% pump gone and need replace.
The possible fault is mechanical and electrical.
If mechanical fault occur, pump will run as usual and make the same noise but no steam or very little steam.
Pump feed very little water to the boiler and boiler makes very little steam.
This can happend as pump doesn't like to "dry run" when catridge in water tank left to dry.
Time from start to until can hear start feed water to the boiler is called "dry run".
If is longer and more often, pump will stop work sooner.
If electrical fault occured fump is dead and not working at all.
Electrical fault is occured by overheating of pump. Pump has termal fuse.
Is recomended to 1 min off after 2mins continous work to let pump cool down.
The pump can make a noise or be dead but if no steam not working.
If you need advice regarding repair faulty steam generator iron click like and contact with us.
Description is based on experience with faulty steam generator irons.
Pump technical details:
Power: 19 W
Max pressure: 2-4 Bar
Max. flow rate 110+/-15cc/min.
Steam generator iton manufacturer flow rate is 90 cc/min.
Shipping 1-st class recorded. Sometimes we can ship cheaper if parcel goes as large letter on post office, but is very rare.
For additional local Twin Falls Concrete visit twinfallsconcrete.
No customer comments for the moment.